CARVIS.KR

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However when you have double glazed repairs near me pane windows that are held in place by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your home until a professional is able to repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap between the window and the door is significant, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time, they are susceptible to a range of problems including sliding. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sagging.

To repair a window (via) that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your upvc repairs window watertight and draughtproof.

uPVC handles may also loosen. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze it could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges will wear out over time. It's easy to replace a hinge on a window, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window repairing in a certain way or by improper installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to get them re-aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side, and may need to be cleaned. In some cases it might be necessary to replace these.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.