CARVIS.KR

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

It is crucial to wash and oil repairing upvc windows windows and doors regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass repairs in your windows can cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If you have repairing double glazing-pane windows that are secured by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance you'll need to find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the distance between the door and the window is large, you might prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a number of problems such as sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act when you discover that your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need to open the window to access the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows repairs near me remain watertight and draught-proof.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close your window and do a test fit. The corner joints of the sash must align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double glazed repairs-glazed glass, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be more than happy to give you suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges may also become unbalanced due to wear, which can cause an opening where the sash and frame meet. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window, can also be misaligned, and again it may be possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The next common reason for draughts is window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will help to block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it is cheaper to replace them instead of fixing them. So, if you're having issues with your upvc windows, it is best to seek professional assistance as soon as you can.